12V Smart Switch

For 12 Volt Systems

The 12V Smart Switch is an adjustable LVD (Low Voltage Disconnect) that includes on/off and over-ride features. The 12V Smart Switch is the perfect way to protect your battery investment from a destructive over-discharge condition. The 12V Smart Switch will constantly monitor your battery and disconnect the attached DC load(s) if voltage drops below an unsafe level. The 12V Smart Switch will directly switch up to a 40 Amp load and can easily be configured to switch much higher loads with the addition of relays or solenoids (sold separately). The 12V Smart Switch also has a handy low voltage signal output that can be used to switch on a light or buzzer to notify you of the low voltage condition or could switch on a battery charger so that the batteries do not sit discharged for extended periods if unattended (light, buzzer, and battery charger not included). The 12V Smart Switch is epoxy encapsulated and ready for marine or tropical environments.

Factory Set Disconnect Voltage is 10.5 Volts
Factory Set Reconnect Voltage is 11 Volts

Voltage must remain below disconnect threshold for at least 5 seconds before disconnect will occur.
Voltage must remain above reconnect threshold for at least 5 seconds before reconnect will occur.